bigpicture

Vibro-sifter

Vibro-sifter

  • The Vibro-sifter mainly comprises of the following parts:
    • Top cone
    • Bottom cone
    • Sieve Mesh
    • Trolley with Castor wheels
  • The vibratory sieve consists of an assembly mounted on a MS.trolley with castor wheels. The sieve has a vibratory motor and the motor with the sieve is mounted on four coil springs. The sieve is integrated into the product conveying line and is suitable for sieving the product in-line during product conveying.
    The sieve has mesh screen of desired size encapsulated in lead free silicon gaskets on either side, and an output is given at the periphery.
    Two sight glasses are provided on the top cone for visual inspection during sieving of the product.
    For cleaning, the top and bottom cone can be easily dismantled by loosening the wing nuts. The vibrating sieve should be electrically disconnected before cleaning with water / solvent etc.
    While the screen of the sieve is vibrating, the material which is present on the screen gets shuffled and the material smaller than the size of mesh falls into the hopper. Thus, only the material of desired size is discharged into the hopper.
    If at any time the sieve gets choked, the sieve will not get damaged. To prevent such a situation, a hose has been connected between the top cone and bottom cone against the vacuum.
For more information, contact
sales.process@cybernetik.co.in